Lennox SCA Fault Code E24
Lennox SCA Fault Code E24 is a warning alarm indicating: Alarm relay fault. The most common causes include Alarm relay coil failure. Estimated repair time: 1-2 hours. This alarm requires immediate attention by a certified HVAC technician.
Alarm Description
Alarm relay fault
Brand: Lennox | Model: SCA (Air-Cooled Scroll Chiller) | Code: E24 | Severity: Warning
Observable Symptoms
- Controller displays alarm code and description
- Chiller may be locked out or running in degraded mode
- Alarm indicator light is illuminated on control panel
What to Check First
Before diving into detailed diagnostics, start with this quick first check:
Probable Causes
- Alarm relay coil failure
- Relay contacts damaged
- Wiring to relay fault
Recommended Inspection Steps
- Check alarm relay coil resistance
- Inspect relay contacts
- Verify wiring to relay
- Replace relay if faulty
Required Tools & Equipment
- Coil cleaning brush and coil cleaner
- Digital multimeter
- Oil level sight glass inspection tool
- Safety PPE (gloves, safety glasses, face shield)
- Wire tracing and continuity tester
Estimated Repair Time
1-2 hours
When to Call a Professional
- If the fault persists after completing all recommended inspection steps
- If you observe unusual noises, vibrations, or oil leaks from the compressor
- If refrigerant charge levels are outside OEM specifications and EPA-certified recovery is needed
- If electrical measurements show voltage imbalance greater than 2% between phases
- If the fault recurs immediately after reset, indicating an unresolved safety condition
- Contact an authorized Lennox service representative for warranty-covered repairs
Related Fault Codes
Other Lennox SCA codes that may be related:
OEM Service Manual Reference
OEM Reference: Lennox SCA Air-Cooled Scroll Chiller Service Manual. Available through Lennox Commercial technical support.
Frequently Asked Questions
What does Lennox SCA fault code E24 mean?
Fault code E24 on a Lennox SCA chiller indicates: Alarm relay fault. This is a warning alarm that requires diagnostic attention.
What causes Lennox SCA alarm code E24?
Common causes include: Alarm relay coil failure; Relay contacts damaged; Wiring to relay fault
How do I fix Lennox SCA error code E24?
Follow the recommended inspection steps below. Start with the quick check, then proceed through each step. If the fault persists after all steps, contact an authorized Lennox service representative.