York YT Fault Code E22

E22
VSD ground fault
Warning
SAFETY WARNING: Commercial chillers contain high-pressure refrigerants and high-voltage electrical components (208V-4160V). Only EPA Section 608 certified technicians should perform diagnostic work. Always follow lockout/tagout procedures and wear appropriate PPE. Do not attempt repairs without proper training and equipment.
AI Summary

York YT Fault Code E22 is a warning alarm indicating: VSD ground fault. The most common causes include Ground fault on output. Estimated repair time: 45-90 minutes. This alarm requires immediate attention by a certified HVAC technician.

Alarm Description

VSD ground fault

Brand: York  |  Model: YT (Centrifugal Chiller (Air-Cooled))  |  Code: E22  |  Severity: Warning

Observable Symptoms

  • Controller displays alarm code and description
  • Chiller may be locked out or running in degraded mode
  • Alarm indicator light is illuminated on control panel

What to Check First

Before diving into detailed diagnostics, start with this quick first check:

Quick Start: Check with megohmmeter

Probable Causes

  • Ground fault on output
  • Motor insulation breakdown
  • Cable damaged

Recommended Inspection Steps

  1. Check with megohmmeter
  2. Test motor insulation
  3. Inspect cables

Required Tools & Equipment

  • Digital multimeter
  • Safety PPE (gloves, safety glasses, face shield)
  • Wire tracing and continuity tester

Estimated Repair Time

45-90 minutes

When to Call a Professional

  • If the fault persists after completing all recommended inspection steps
  • If you observe unusual noises, vibrations, or oil leaks from the compressor
  • If refrigerant charge levels are outside OEM specifications and EPA-certified recovery is needed
  • If electrical measurements show voltage imbalance greater than 2% between phases
  • If the fault recurs immediately after reset, indicating an unresolved safety condition
  • Contact an authorized York service representative for warranty-covered repairs

Related Fault Codes

Other York YT codes that may be related:

E1E2E3E4E5

OEM Service Manual Reference

OEM Reference: York YT Centrifugal Chiller Service Manual. Johnson Controls Technical Literature.

Frequently Asked Questions

What does York YT fault code E22 mean?

Fault code E22 on a York YT chiller indicates: VSD ground fault. This is a warning alarm that requires diagnostic attention.

What causes York YT alarm code E22?

Common causes include: Ground fault on output; Motor insulation breakdown; Cable damaged

How do I fix York YT error code E22?

Follow the recommended inspection steps below. Start with the quick check, then proceed through each step. If the fault persists after all steps, contact an authorized York service representative.

Disclaimer: All lookup data is for reference only. Do not use this information to replace certified professional HVAC technician judgment. Always refer to original OEM official service manual for York YT service procedures.