Trane RTHB Fault Code C5

C5
Low Chilled Water Temperature: Unit Off
Warning
SAFETY WARNING: Commercial chillers contain high-pressure refrigerants and high-voltage electrical components (208V-4160V). Only EPA Section 608 certified technicians should perform diagnostic work. Always follow lockout/tagout procedures and wear appropriate PPE. Do not attempt repairs without proper training and equipment.
AI Summary

Trane RTHB Fault Code C5 is a warning alarm indicating: Low Chilled Water Temperature: Unit Off. The most common causes include Setpoint too low. Estimated repair time: 45-90 minutes. This alarm requires immediate attention by a certified HVAC technician.

Alarm Description

Low Chilled Water Temperature: Unit Off

Brand: Trane  |  Model: RTHB (Helical Rotary Chiller (Water-Cooled))  |  Code: C5  |  Severity: Warning

Observable Symptoms

  • Controller displays alarm code and description
  • Chiller may be locked out or running in degraded mode
  • Alarm indicator light is illuminated on control panel

What to Check First

Before diving into detailed diagnostics, start with this quick first check:

Quick Start: Verify setpoint

Probable Causes

  • Setpoint too low
  • Flow low
  • Sensor inaccurate

Recommended Inspection Steps

  1. Verify setpoint
  2. Check flow
  3. Calibrate sensor

Required Tools & Equipment

  • Infrared thermometer or calibrated temperature probe
  • Safety PPE (gloves, safety glasses, face shield)

Estimated Repair Time

45-90 minutes

When to Call a Professional

  • If the fault persists after completing all recommended inspection steps
  • If you observe unusual noises, vibrations, or oil leaks from the compressor
  • If refrigerant charge levels are outside OEM specifications and EPA-certified recovery is needed
  • If electrical measurements show voltage imbalance greater than 2% between phases
  • If the fault recurs immediately after reset, indicating an unresolved safety condition
  • Contact an authorized Trane service representative for warranty-covered repairs

Related Fault Codes

Other Trane RTHB codes that may be related:

EDFDF5B5BA

OEM Service Manual Reference

OEM Reference: Trane RTHB Helical Rotary Chiller Service Manual. Available through Trane Commercial support.

Frequently Asked Questions

What does Trane RTHB fault code C5 mean?

Fault code C5 on a Trane RTHB chiller indicates: Low Chilled Water Temperature: Unit Off. This is a warning alarm that requires diagnostic attention.

What causes Trane RTHB alarm code C5?

Common causes include: Setpoint too low; Flow low; Sensor inaccurate

How do I fix Trane RTHB error code C5?

Follow the recommended inspection steps below. Start with the quick check, then proceed through each step. If the fault persists after all steps, contact an authorized Trane service representative.

Disclaimer: All lookup data is for reference only. Do not use this information to replace certified professional HVAC technician judgment. Always refer to original OEM official service manual for Trane RTHB service procedures.