Trane RTHB Fault Code 2E6
Trane RTHB Fault Code 2E6 is a warning alarm indicating: High Condenser Refrigerant Temperature. The most common causes include Condenser flow low. Estimated repair time: 4-6 hours (requires isolating water circuit, mechanical or chemical tube cleaning). This alarm requires immediate attention by a certified HVAC technician.
Alarm Description
High Condenser Refrigerant Temperature
Brand: Trane | Model: RTHB (Helical Rotary Chiller (Water-Cooled)) | Code: 2E6 | Severity: Warning
Observable Symptoms
- Controller displays alarm code and description
- Chiller may be locked out or running in degraded mode
- Alarm indicator light is illuminated on control panel
What to Check First
Before diving into detailed diagnostics, start with this quick first check:
Probable Causes
- Condenser flow low
- Condenser temp high
- Tubes fouled
- Non-condensables
Recommended Inspection Steps
- Verify flow
- Check temp
- Clean tubes
- Vent non-condensables
Required Tools & Equipment
- Coil cleaning brush and coil cleaner
- Infrared thermometer or calibrated temperature probe
- PT chart for refrigerant type
- Safety PPE (gloves, safety glasses, face shield)
Estimated Repair Time
4-6 hours (requires isolating water circuit, mechanical or chemical tube cleaning)
When to Call a Professional
- If the fault persists after completing all recommended inspection steps
- If you observe unusual noises, vibrations, or oil leaks from the compressor
- If refrigerant charge levels are outside OEM specifications and EPA-certified recovery is needed
- If electrical measurements show voltage imbalance greater than 2% between phases
- If the fault recurs immediately after reset, indicating an unresolved safety condition
- Contact an authorized Trane service representative for warranty-covered repairs
Related Fault Codes
Other Trane RTHB codes that may be related:
OEM Service Manual Reference
OEM Reference: Trane RTHB Helical Rotary Chiller Service Manual. Available through Trane Commercial support.
Frequently Asked Questions
What does Trane RTHB fault code 2E6 mean?
Fault code 2E6 on a Trane RTHB chiller indicates: High Condenser Refrigerant Temperature. This is a warning alarm that requires diagnostic attention.
What causes Trane RTHB alarm code 2E6?
Common causes include: Condenser flow low; Condenser temp high; Tubes fouled
How do I fix Trane RTHB error code 2E6?
Follow the recommended inspection steps below. Start with the quick check, then proceed through each step. If the fault persists after all steps, contact an authorized Trane service representative.