McQuay PFS Fault Code E31
McQuay PFS Fault Code E31 is a warning alarm indicating: High ambient temperature alarm. The most common causes include Ambient exceeds design limit. Estimated repair time: 1-2 hours. This alarm requires immediate attention by a certified HVAC technician.
Alarm Description
High ambient temperature alarm
Brand: McQuay | Model: PFS (Air-Cooled Scroll Chiller) | Code: E31 | Severity: Warning
Observable Symptoms
- Controller displays alarm code and description
- Chiller may be locked out or running in degraded mode
- Alarm indicator light is illuminated on control panel
What to Check First
Before diving into detailed diagnostics, start with this quick first check:
Probable Causes
- Ambient exceeds design limit
- Condenser capacity insufficient at high ambient
- Low ambient kit fault
Recommended Inspection Steps
- Verify ambient temp
- Check condenser capacity
- Verify low ambient kit
- Reduce load if needed
Required Tools & Equipment
- Infrared thermometer or calibrated temperature probe
- Safety PPE (gloves, safety glasses, face shield)
Estimated Repair Time
1-2 hours
When to Call a Professional
- If the fault persists after completing all recommended inspection steps
- If you observe unusual noises, vibrations, or oil leaks from the compressor
- If refrigerant charge levels are outside OEM specifications and EPA-certified recovery is needed
- If electrical measurements show voltage imbalance greater than 2% between phases
- If the fault recurs immediately after reset, indicating an unresolved safety condition
- Contact an authorized McQuay service representative for warranty-covered repairs
Related Fault Codes
Other McQuay PFS codes that may be related:
OEM Service Manual Reference
OEM Reference: McQuay PFS Air-Cooled Scroll Chiller Service Manual. Available through Daikin Applied (formerly McQuay) technical support.
Frequently Asked Questions
What does McQuay PFS fault code E31 mean?
Fault code E31 on a McQuay PFS chiller indicates: High ambient temperature alarm. This is a warning alarm that requires diagnostic attention.
What causes McQuay PFS alarm code E31?
Common causes include: Ambient exceeds design limit; Condenser capacity insufficient at high ambient; Low ambient kit fault
How do I fix McQuay PFS error code E31?
Follow the recommended inspection steps below. Start with the quick check, then proceed through each step. If the fault persists after all steps, contact an authorized McQuay service representative.