McQuay PFS Fault Code E13
McQuay PFS Fault Code E13 is a critical safety alarm indicating: Oil level low. The most common causes include Refrigerant leak carrying oil. Estimated repair time: 1-2 hours (requires oil addition or oil change, filter replacement). This alarm requires immediate attention by a certified HVAC technician.
Alarm Description
Oil level low
Brand: McQuay | Model: PFS (Air-Cooled Scroll Chiller) | Code: E13 | Severity: Critical
Observable Symptoms
- Oil sight glass shows low level or empty
- Compressor may make unusual noise from lack of lubrication
- Oil pressure differential alarm may also be active
What to Check First
Before diving into detailed diagnostics, start with this quick first check:
Probable Causes
- Refrigerant leak carrying oil
- Oil separator malfunction
- Bearing wear consuming oil
Recommended Inspection Steps
- Check oil sight glass
- Inspect oil return system
- Check for leaks
- Add oil if low
Required Tools & Equipment
- EPA-certified refrigerant recovery unit
- Electronic leak detector
- Oil level sight glass inspection tool
- PT chart for refrigerant type
- Safety PPE (gloves, safety glasses, face shield)
Estimated Repair Time
1-2 hours (requires oil addition or oil change, filter replacement)
When to Call a Professional
- If the fault persists after completing all recommended inspection steps
- If you observe unusual noises, vibrations, or oil leaks from the compressor
- If refrigerant charge levels are outside OEM specifications and EPA-certified recovery is needed
- If electrical measurements show voltage imbalance greater than 2% between phases
- If the fault recurs immediately after reset, indicating an unresolved safety condition
- Contact an authorized McQuay service representative for warranty-covered repairs
Related Fault Codes
Other McQuay PFS codes that may be related:
OEM Service Manual Reference
OEM Reference: McQuay PFS Air-Cooled Scroll Chiller Service Manual. Available through Daikin Applied (formerly McQuay) technical support.
Frequently Asked Questions
What does McQuay PFS fault code E13 mean?
Fault code E13 on a McQuay PFS chiller indicates: Oil level low. This is a critical safety alarm that requires diagnostic attention.
What causes McQuay PFS alarm code E13?
Common causes include: Refrigerant leak carrying oil; Oil separator malfunction; Bearing wear consuming oil
How do I fix McQuay PFS error code E13?
Follow the recommended inspection steps below. Start with the quick check, then proceed through each step. If the fault persists after all steps, contact an authorized McQuay service representative.