McQuay ALS Fault Code E13

E13
Oil level low
Critical
SAFETY WARNING: Commercial chillers contain high-pressure refrigerants and high-voltage electrical components (208V-4160V). Only EPA Section 608 certified technicians should perform diagnostic work. Always follow lockout/tagout procedures and wear appropriate PPE. Do not attempt repairs without proper training and equipment.
AI Summary

McQuay ALS Fault Code E13 is a critical safety alarm indicating: Oil level low. The most common causes include Oil leak. Estimated repair time: 1-2 hours (requires oil addition or oil change, filter replacement). This alarm requires immediate attention by a certified HVAC technician.

Alarm Description

Oil level low

Brand: McQuay  |  Model: ALS (Air-Cooled Screw Chiller)  |  Code: E13  |  Severity: Critical

Observable Symptoms

  • Oil sight glass shows low level or empty
  • Compressor may make unusual noise from lack of lubrication
  • Oil pressure differential alarm may also be active

What to Check First

Before diving into detailed diagnostics, start with this quick first check:

Quick Start: Check sight glass

Probable Causes

  • Oil leak
  • Separator malfunction
  • Bearing wear

Recommended Inspection Steps

  1. Check sight glass
  2. Inspect oil return
  3. Add oil if low

Required Tools & Equipment

  • EPA-certified refrigerant recovery unit
  • Electronic leak detector
  • Oil level sight glass inspection tool
  • Safety PPE (gloves, safety glasses, face shield)

Estimated Repair Time

1-2 hours (requires oil addition or oil change, filter replacement)

When to Call a Professional

  • If the fault persists after completing all recommended inspection steps
  • If you observe unusual noises, vibrations, or oil leaks from the compressor
  • If refrigerant charge levels are outside OEM specifications and EPA-certified recovery is needed
  • If electrical measurements show voltage imbalance greater than 2% between phases
  • If the fault recurs immediately after reset, indicating an unresolved safety condition
  • Contact an authorized McQuay service representative for warranty-covered repairs

Related Fault Codes

Other McQuay ALS codes that may be related:

E01E02E03E04E05

OEM Service Manual Reference

OEM Reference: McQuay ALS Air-Cooled Screw Chiller Service Manual. Available through Daikin Applied technical support.

Frequently Asked Questions

What does McQuay ALS fault code E13 mean?

Fault code E13 on a McQuay ALS chiller indicates: Oil level low. This is a critical safety alarm that requires diagnostic attention.

What causes McQuay ALS alarm code E13?

Common causes include: Oil leak; Separator malfunction; Bearing wear

How do I fix McQuay ALS error code E13?

Follow the recommended inspection steps below. Start with the quick check, then proceed through each step. If the fault persists after all steps, contact an authorized McQuay service representative.

Disclaimer: All lookup data is for reference only. Do not use this information to replace certified professional HVAC technician judgment. Always refer to original OEM official service manual for McQuay ALS service procedures.