Lennox LCA Fault Code E28
Lennox LCA Fault Code E28 is a warning alarm indicating: Energy efficiency alarm. The most common causes include Below expected efficiency. Estimated repair time: 1-2 hours. This alarm requires immediate attention by a certified HVAC technician.
Alarm Description
Energy efficiency alarm
Brand: Lennox | Model: LCA (Air-Cooled Chiller) | Code: E28 | Severity: Warning
Observable Symptoms
- Controller displays alarm code and description
- Chiller may be locked out or running in degraded mode
- Alarm indicator light is illuminated on control panel
What to Check First
Before diving into detailed diagnostics, start with this quick first check:
Probable Causes
- Below expected efficiency
- Approach temps high
- Charge incorrect
- Fouling
Recommended Inspection Steps
- Check kW/ton
- Inspect approach temps
- Verify charge
- Check tubes
Required Tools & Equipment
- Coil cleaning brush and coil cleaner
- PT chart for refrigerant type
- Safety PPE (gloves, safety glasses, face shield)
Estimated Repair Time
1-2 hours
When to Call a Professional
- If the fault persists after completing all recommended inspection steps
- If you observe unusual noises, vibrations, or oil leaks from the compressor
- If refrigerant charge levels are outside OEM specifications and EPA-certified recovery is needed
- If electrical measurements show voltage imbalance greater than 2% between phases
- If the fault recurs immediately after reset, indicating an unresolved safety condition
- Contact an authorized Lennox service representative for warranty-covered repairs
Related Fault Codes
Other Lennox LCA codes that may be related:
OEM Service Manual Reference
OEM Reference: Lennox LCA Air-Cooled Chiller Service Manual. Available through Lennox Commercial technical support.
Frequently Asked Questions
What does Lennox LCA fault code E28 mean?
Fault code E28 on a Lennox LCA chiller indicates: Energy efficiency alarm. This is a warning alarm that requires diagnostic attention.
What causes Lennox LCA alarm code E28?
Common causes include: Below expected efficiency; Approach temps high; Charge incorrect
How do I fix Lennox LCA error code E28?
Follow the recommended inspection steps below. Start with the quick check, then proceed through each step. If the fault persists after all steps, contact an authorized Lennox service representative.