ClimaCool ACC Fault Code E19
ClimaCool ACC Fault Code E19 is a warning alarm indicating: Pumpdown failure. The most common causes include Solenoid not closing. Estimated repair time: 1-2 hours. This alarm requires immediate attention by a certified HVAC technician.
Alarm Description
Pumpdown failure
Brand: ClimaCool | Model: ACC (Modular Air-Cooled Chiller) | Code: E19 | Severity: Warning
Observable Symptoms
- Controller displays alarm code and description
- Chiller may be locked out or running in degraded mode
- Alarm indicator light is illuminated on control panel
What to Check First
Before diving into detailed diagnostics, start with this quick first check:
Probable Causes
- Solenoid not closing
- Pressure not reaching setpoint
- Timer expired
- Non-condensables
Recommended Inspection Steps
- Check solenoid
- Verify pressure
- Inspect logic
- Vent non-condensables
Required Tools & Equipment
- Digital multimeter
- OEM service manual
- Safety PPE (gloves, safety glasses)
- Safety PPE (gloves, safety glasses, face shield)
Estimated Repair Time
1-2 hours
When to Call a Professional
- If the fault persists after completing all recommended inspection steps
- If you observe unusual noises, vibrations, or oil leaks from the compressor
- If refrigerant charge levels are outside OEM specifications and EPA-certified recovery is needed
- If electrical measurements show voltage imbalance greater than 2% between phases
- If the fault recurs immediately after reset, indicating an unresolved safety condition
- Contact an authorized ClimaCool service representative for warranty-covered repairs
Related Fault Codes
Other ClimaCool ACC codes that may be related:
OEM Service Manual Reference
OEM Reference: ClimaCool ACC Air-Cooled Modular Chiller Installation and Service Manual. Available through ClimaCool Corp technical support.
Frequently Asked Questions
What does ClimaCool ACC fault code E19 mean?
Fault code E19 on a ClimaCool ACC chiller indicates: Pumpdown failure. This is a warning alarm that requires diagnostic attention.
What causes ClimaCool ACC alarm code E19?
Common causes include: Solenoid not closing; Pressure not reaching setpoint; Timer expired
How do I fix ClimaCool ACC error code E19?
Follow the recommended inspection steps below. Start with the quick check, then proceed through each step. If the fault persists after all steps, contact an authorized ClimaCool service representative.