Carrier 23XRV Fault Code 68
Carrier 23XRV Fault Code 68 is a critical safety alarm indicating: Low oil pressure. The most common causes include Oil pump wear. Estimated repair time: 45-90 minutes. This alarm requires immediate attention by a certified HVAC technician.
Alarm Description
Low oil pressure
Brand: Carrier | Model: 23XRV (Variable Speed Screw Chiller (AquaForce)) | Code: 68 | Severity: Critical
Observable Symptoms
- Oil sight glass shows low level or empty
- Compressor may make unusual noise from lack of lubrication
- Oil pressure differential alarm may also be active
What to Check First
Before diving into detailed diagnostics, start with this quick first check:
Probable Causes
- Oil pump wear
- Filter clogged
- Low oil level
Recommended Inspection Steps
- Check oil level
- Replace filter
- Measure pump pressure
Required Tools & Equipment
- Oil level sight glass inspection tool
- Safety PPE (gloves, safety glasses, face shield)
Estimated Repair Time
45-90 minutes
When to Call a Professional
- If the fault persists after completing all recommended inspection steps
- If you observe unusual noises, vibrations, or oil leaks from the compressor
- If refrigerant charge levels are outside OEM specifications and EPA-certified recovery is needed
- If electrical measurements show voltage imbalance greater than 2% between phases
- If the fault recurs immediately after reset, indicating an unresolved safety condition
- Contact an authorized Carrier service representative for warranty-covered repairs
Related Fault Codes
Other Carrier 23XRV codes that may be related:
OEM Service Manual Reference
OEM Reference: Carrier 23XRV AquaForce Variable Speed Screw Chiller Service Manual. Available through Carrier Commercial Systems.
Frequently Asked Questions
What does Carrier 23XRV fault code 68 mean?
Fault code 68 on a Carrier 23XRV chiller indicates: Low oil pressure. This is a critical safety alarm that requires diagnostic attention.
What causes Carrier 23XRV alarm code 68?
Common causes include: Oil pump wear; Filter clogged; Low oil level
How do I fix Carrier 23XRV error code 68?
Follow the recommended inspection steps below. Start with the quick check, then proceed through each step. If the fault persists after all steps, contact an authorized Carrier service representative.