Carrier 23XRV Fault Code 16

16
Suction pressure transducer fault
Warning
SAFETY WARNING: Commercial chillers contain high-pressure refrigerants and high-voltage electrical components (208V-4160V). Only EPA Section 608 certified technicians should perform diagnostic work. Always follow lockout/tagout procedures and wear appropriate PPE. Do not attempt repairs without proper training and equipment.
AI Summary

Carrier 23XRV Fault Code 16 is a warning alarm indicating: Suction pressure transducer fault. The most common causes include Transducer port blocked. Estimated repair time: 45-90 minutes. This alarm requires immediate attention by a certified HVAC technician.

Alarm Description

Suction pressure transducer fault

Brand: Carrier  |  Model: 23XRV (Variable Speed Screw Chiller (AquaForce))  |  Code: 16  |  Severity: Warning

Observable Symptoms

  • Pressure reading on controller does not match mechanical gauge reading
  • System may trip on pressure-related safety even though actual pressure is normal

What to Check First

Before diving into detailed diagnostics, start with this quick first check:

Quick Start: Compare to gauge

Probable Causes

  • Transducer port blocked
  • Output drift
  • Connector corrosion

Recommended Inspection Steps

  1. Compare to gauge
  2. Clean port
  3. Replace transducer

Required Tools & Equipment

  • Coil cleaning brush and coil cleaner
  • Refrigerant manifold gauge set
  • Safety PPE (gloves, safety glasses, face shield)
  • Wire tracing and continuity tester

Estimated Repair Time

45-90 minutes

When to Call a Professional

  • If the fault persists after completing all recommended inspection steps
  • If you observe unusual noises, vibrations, or oil leaks from the compressor
  • If refrigerant charge levels are outside OEM specifications and EPA-certified recovery is needed
  • If electrical measurements show voltage imbalance greater than 2% between phases
  • If the fault recurs immediately after reset, indicating an unresolved safety condition
  • Contact an authorized Carrier service representative for warranty-covered repairs

Related Fault Codes

Other Carrier 23XRV codes that may be related:

17144454

OEM Service Manual Reference

OEM Reference: Carrier 23XRV AquaForce Variable Speed Screw Chiller Service Manual. Available through Carrier Commercial Systems.

Frequently Asked Questions

What does Carrier 23XRV fault code 16 mean?

Fault code 16 on a Carrier 23XRV chiller indicates: Suction pressure transducer fault. This is a warning alarm that requires diagnostic attention.

What causes Carrier 23XRV alarm code 16?

Common causes include: Transducer port blocked; Output drift; Connector corrosion

How do I fix Carrier 23XRV error code 16?

Follow the recommended inspection steps below. Start with the quick check, then proceed through each step. If the fault persists after all steps, contact an authorized Carrier service representative.

Disclaimer: All lookup data is for reference only. Do not use this information to replace certified professional HVAC technician judgment. Always refer to original OEM official service manual for Carrier 23XRV service procedures.